U.S. Robotics USR8054 – Wireless Turbo Access Point & Router:

• Integrated 54/100/125 Mbps 802.11g Wireless Turbo Access Point
• Four RJ-45, 10/100 Mbps auto-sensing and auto-switching Ethernet LAN ports
• One RJ-45, 10/100 Mbps auto-sensing and auto-switching Ethernet WAN port
• Static and Dynamic IP addressing, MAC Address Cloning
• DHCP server (LAN) and client (WAN)
• PPP over Ethernet (PPPoE) support
• DMZ host support
• Embedded PPTP Client
• VPN pass-through support for PPTP, L2TP, and IPSec

USR8054 802.11g Wireless Turbo Router

Upgrading USR8054 to version 1.67b44 below will reset your wireless router to the factory default settings, including your password. USRobotics is offering this 125 Mbps upgrade to enhance connectivity via the following features:

• improve issues with frequent router resets under certain data traffic conditions.
• WPA and WPA-PSK wireless security modes
• 125 Mbps frame bursting enhancement
• Dynamic wireless channel to avoid interference
• Supports reception of Multicast streaming to LAN clients
• Improved browser support
• Improved wireless sensitivity prevents resets in noisy environments

Download USR8054 version 1.67b44 Firmware -> USR8054_v167b44.zip

Configure the basic connection settings:

Launch a Web browser. In the location or address line of your Web browser, type http://192.168.123.254 to access the Web User Interface. The default user name is admin. There is no default password. Click OK to login.

Perform the steps of the Setup Wizard to configure the basic connection settings of the Wireless Turbo Access Point & Router. When you are finished configuring the basic connection settings, you should now have Internet access.

Hot to Reset USR8054 Router:

Press in and hold the RESET button for between five and ten seconds. This will reset the Wireless Turbo Access Point & Router to the factory default settings (default IP 192.168.123.254)