Comments on: Insignia NS-DXA1 DTV Converter Box http://blog.4rev.net/2008-02/insignia-ns-dxa1-dtv-converter-box/ 4 REV NET Mon, 23 Nov 2009 18:19:48 -0400 http://wordpress.org/?v=2.8.4 hourly 1 By: byrev http://blog.4rev.net/2008-02/insignia-ns-dxa1-dtv-converter-box/comment-page-1/#comment-51519 byrev Mon, 23 Feb 2009 00:50:08 +0000 http://byrev.net/2008-02/insignia-ns-dxa1-dtv-converter-box/#comment-51519 From the instruction manual: Programming the remote control You can control the power button on the TV with the supplied remote control. To do this, you need to program the remote control. To program the remote control: 1 Determine if the TV is a model that can be controlled by the remote control. See “Controllable TV brands” on page 14. 2 Turn on the TV. 3 While you press and hold TV POWER on the remote control, press CH or CH one or more times until the TV turns off. Each time you press one of these buttons, the remote control sends a manufacturer code (between 1 and 45) to the TV. -------------- or watch here: http://www.replacementremotes.com/store/prodthumbs.cfm?categoryid=1092 for your remote cotrol. Theoretically is possible to work with any new universal remote control (ask were you buy). From the instruction manual:

Programming the remote control
You can control the power button on the TV with
the supplied remote control. To do this, you
need to program the remote control.

To program the remote control:

1 Determine if the TV is a model that can be
controlled by the remote control. See
“Controllable TV brands” on page 14.

2 Turn on the TV.

3 While you press and hold TV POWER on the
remote control, press CH or CH one or
more times until the TV turns off. Each time
you press one of these buttons, the remote
control sends a manufacturer code (between
1 and 45) to the TV.
————–
or watch here:
http://www.replacementremotes.com/store/prodthumbs.cfm?categoryid=1092
for your remote cotrol.

Theoretically is possible to work with any new universal remote control (ask were you buy).

]]> By: len chernoff http://blog.4rev.net/2008-02/insignia-ns-dxa1-dtv-converter-box/comment-page-1/#comment-51517 len chernoff Sun, 22 Feb 2009 22:03:17 +0000 http://byrev.net/2008-02/insignia-ns-dxa1-dtv-converter-box/#comment-51517 I need remote control for insignia. will any universal remote work? I need remote control for insignia. will any universal remote work?

]]> By: bob http://blog.4rev.net/2008-02/insignia-ns-dxa1-dtv-converter-box/comment-page-1/#comment-44765 bob Tue, 08 Jul 2008 15:05:30 +0000 http://byrev.net/2008-02/insignia-ns-dxa1-dtv-converter-box/#comment-44765 just hook some batteries to the box it uses 5v and 3v and draws300 ma at 7 volts and 700ma at 3volts just tap the jumpers in the power supply l122 for the 3volts and l 121 for the 7 volts ciruit when the red light comes on its working. Use a switch for switch over . thanks may this may help just hook some batteries to the box it uses
5v and 3v and draws300 ma at 7 volts and
700ma at 3volts just tap the jumpers in the
power supply l122 for the 3volts and l 121 for
the 7 volts ciruit when the red light comes on
its working. Use a switch for switch over .
thanks may this may help

]]> By: Jim http://blog.4rev.net/2008-02/insignia-ns-dxa1-dtv-converter-box/comment-page-1/#comment-44162 Jim Fri, 27 Jun 2008 17:00:34 +0000 http://byrev.net/2008-02/insignia-ns-dxa1-dtv-converter-box/#comment-44162 Great little box. Anyone know of a modification to keep this thing powered on after a power failure. Great little box. Anyone know of a modification to keep this thing powered on after a power failure.

]]>